Image: Amazon product listing
Anycubic PLA Refill, Texture Grey
Standard PLA · 1.75mm
Variant
Current offers
| Variant | Price | Per kg | Buy |
|---|---|---|---|
| Black, 1kg | $10.79Verified | n/a | Buy at Amazon (opens in a new tab) |
| Texture Grey, 1kg | $10.19Verified | n/a | Buy at Amazon (opens in a new tab) |
Price per kg is the price divided by the total net filament weight; samples of 250g and under are labeled.
Specifications
We have not yet verified these specifications against the manufacturer's documentation.
| Specification | Value | Source |
|---|---|---|
| Material | PLANot verified | Not verified |
| Type | Standard PLANot verified | Not verified |
| Diameter | 1.75mmNot verified | Not verified |
| Tolerance | Not verified | |
| Net filament weight | 1kgAs stated in the retailer listing | As stated in the retailer listing |
| Spool type | RefillNot verified | Not verified |
| Spool dimensions | Not verified | |
| Nozzle temperature | Not verified | |
| Bed temperature | Not verified | |
| Maximum speed | Not verified | |
| Abrasive | Not verified | |
| Drying advice | Not verified | |
| AMS and multi-material feeders | Not verified |
Printer compatibility
We cannot check this filament against any printer yet: Anycubic does not publish a figure our rules need (usually the nozzle temperature range or diameter).
Alternatives
Same type, in stock.
Goes well with
Bulk packs of the same type, if you print a lot of it.
Keep this spool dry
Dryers and storage with a verified price. Complementary suggestions, not part of this offer.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.